Top Architectural Standing Seam Metal Roof

By Asah 12 Feb, 2019 Post a Comment

HM Metalcraft Architectural metal roof and facade

The Abc’s of Standing Seam Metal Roofing: Structural And Architectural Standing Seam Metal Roofing systems can be divided into two basic categories: structural and architectural. Structural and architectural systems are designed, engineered and installed to satisfy different metal roofing requirements. Standing seam metal roofing systems are installed over an insulating material for added energy efficiency. This insulation also reduces the noise problems that may be found in some metal systems. Standing seam metal roofing systems are normally used for roof slopes of 3:12 or greater. This roofing system does not use exposed fasteners; the raised seams interlock tightly and prevent water penetration. Standing seam metal roofing is defined as a concealed fastener metal panel system that features vertical legs and a broad, flat area between the two legs. It’s also described as having raised seams, or vertical legs, that rise above the level of the panel’s flat area. For both architectural shingles and standing seam metal roofing, this is usually a non-issue. Because of asphalt shingle’s dominance in the market, finding quality installers is easier in most geographic locations. Metal roofing tends to be more popular in coastal areas especially compared to asphalt shingles. Standing Seam is what often comes to mind when people think of metal cladding. One of the most versatile cladding systems available, Standing Seam can be installed across numerous applications, from roofing to façades, soffits, and even on internal walls as an architectural feature finish. This is achieved through our expertise in forming individual panels into tapered, flat, curved, concave, or convex shapes to perfectly suit the application. Standing seam roofs are generally made from thicker grades of steel than corrugated steel roofs. While many corrugated steel roofs are made using the thinner 29 gauge steel, a minimum of 26 gauge G-90 galvanized steel or more commonly Galvalume steel (better) is used for manufacturing of standing seam metal panels. .

Our cutting-edge manufacturing process, meticulous performance testing, innovative engineering and design capabilities allow us to support the architectural design and construction community through each phase of the building process. Our products include standing seam metal roofs, insulated architectural panels, exposed fastener systems and more. MBCI metal roofing & wall systems have been used for a wide range of architectural building applications, including corporate offices, research Applicability • The metal roof system as described within this manual is classified as a standing seam metal roof panel. Panels are mechanically attached with hidden fasteners to a continuous solid substrate with an underlayment. The panels can span distances of over 3m/10ft, depending upon the load criteria – and they can be installed without penetrating the standing seam.Tapered standing seam panels are ideal for cost-effectively cladding and roofing large round or conical buildings architectural metal roof & vinyl product solutions At TAMCO, Thompson Architectural Metals Company, we have been proudly providing and delivering quality metal roofing products and accessories, as well as ventilation for shingle and tile roofs throughout Florida and the southeastern United States since 1979. .

HM Metalcraft Architectural metal roof and facade

Standing Seam Metal Roof Basics